Procedure:  Making Square and Exact Panel Cuts

 .
Last week, I completed the first two pages of this subject, but I did not explain satisfactorily, how to use the angle guide. We have learned that to make exact, perpendicular cuts each and every time, that there is a method. This one picture shows that method. When you lower the guide rail on the work piece, you should position the angle guide fence (arrow) on the workpiece first and keep some firm pressure here as you lower the guide.  The grip of the guide rail on the workpiece is so good, that once it is down, nudging it is difficult — that is good. While it is possible to add a clamp to the guide rail, we have found that it is rarely needed.